Orthopedic Implants Manufacturer

Foot & Ankle

Tibia XLOC Plate, distal anterolateral

The tibia XLOC distal anterolateral plates are intended for fractures of 

The tibia XLOC distal medial plate has an anatomically pre-shaped distal head. The shaft of the plate is bent and twisted in order to fit the bone of the distal tibia.

  • High grade Titanium material
  • Anodized type II
  • Reduced risk of cold welding
  • Good biocompatibility
  • Available in left and right plates
  • Distal head shaped design for optimal positioning
  • Proximal shaft bent and twisted for fitting the bone
  • 5 to 15 holes
  • K-wire holes supports plate positioning
  • Conical plate tip
  • Limited contact profile to protect the blood supply
  • Rounded edges and shaft profile reduce the soft tissue irritation
  • Shaft with compression holes for dynamic axial compression for common Ø 3.5 mm cortical screws
  • Proximal and distal locking holes for XLOC Ø 3.5 mm locking screws
  • Distal locking holes for XLOC Ø 4.0 mm cancellous locking screws

Tibia XLOC Tab, distal Medial

The tibia XLOC distal medial plates are intended for fractures of the distal tibia. The tibia XLOC plate has an anatomically pre-shaped distal head. The shaft of the plate is bent and twisted in order to fit the bone of the distal tibia.

  • High grade Titanium material
  • Anodized type II
  • Reduced risk of cold welding
  • Good biocompatibility
  • Available in left and right plates
  • Distal head shaped design for optimal positioning
  • Proximal shaft bent and twisted for fitting the bone
  • 4 to 14 holes
  • K-wire holes supports plate positioning
  • Conical plate tip
  • Limited contact profile to protect the blood supply
  • Rounded edges and shaft profile reduce the soft tissue irritation
  • Compression holes for dynamic axial compression for common Ø 3.5 mm cortical screws
  • Proximal and distal locking holes for XLOC Ø 3.5 mm locking screws
  • Distal locking holes for XLOC Ø 4.0 mm cancellous locking screws
  • Distal tab for medial malleolus

Tibia XLOC plate, distal medial, without Tab

The tibia XLOC distal medial plates are intended for fractures of the distal tibia. The tibia XLOC plate has an anatomically pre-shaped distal head. The shaft of the plate is bent and twisted in order to fit the bone of the distal tibia.

  • High grade Titanium material
  • Anodized type II
  • Reduced risk of cold welding
  • Good biocompatibility
  • Available in left and right plates
  • Distal head shaped design for optimal positioning
  • Proximal shaft bent and twisted for fitting the bone
  • 4 to 14 holes
  • K-wire holes supports plate positioning
  • Conical plate tip
  • Limited contact profile to protect the blood supply
  • Rounded edges and shaft profile reduce the soft tissue irritation
  • Compression holes for dynamic axial compression for common Ø 3.5 mm cortical screws
  • Proximal and distal locking holes for XLOC Ø 3.5 mm locking screws
  • Distal locking holes for XLOC Ø 4.0 mm cancellous locking screws
  • Distal tab for medial malleolus

Calcaneal XLOC Plate

The calcaneal XLOC plate is indicated for:

  • High grade Titanium material
  • Anodized type II
  • Reduced risk of cold welding
  • Good biocompatibility
  • Available in left and right plates
  • 15 XLOC locking holes for XLOC Ø 3.5 mm locking screws
  • Usable also with standard cortical screws Ø 3.5 mm usable
  • Application laterally
  • Adaptable tabs

RECONSTRUCTION 3.5 XLOC PLATE​

The reconstrution 3.5 XLOC is indicated for fractures of:

  • High grade Titanium material
  • Anodized type II
  • Reduced risk of cold welding
  • Good biocompatibility
  • 4 to 12 holes
  • K-wire holes supports plate positioning
  • Rounded edges and shaft profile reduce the soft tissue irritation
  • Compression holes for dynamic axial compression for common Ø 3.5 mm cortical screws and Ø 4.0 cancellous screws
  • Locking holes for XLOC Ø 3.5 and Ø 4.0 mm cancellous locking screws

One third tubular xloc plate

Indicated for fractures of long and small bone fragments e.g. Ulna. Only to be used for buttressing, neutralization or compression.

 
  • High grade Titanium material
  • Anodized type II
  • Reduced risk of cold welding
  • Good biocompatibility
  • 4 to 12 holes
  • Rounded edges and shaft profile reduce the soft tissue irritation
  • Compression holes for dynamic axial compression for common Ø 3.5 mm cortical screws and Ø 4.0 cancellous screws
  • Locking holes for XLOC Ø 3.5 and Ø 4.0 mm cancellous locking screws

CANNULATED SCREWS

Our cannulated screw systems 3.5 / 4.0 / 4.5 and 7.0 conists of screws, washers, and instruments designed for surgical treatments of osteotomies, fusions or fractures of 

  • Low profile heads to reduce potential for sof-tissue irritation
  • Excellent self-drilling and self-tapping tips
  • Reverse cutting thread for easier screw removal
  • Standard hexagonal screw heads is compatible with screwdrivers in other commonly used AF instrument sets.